The examples shown in Tables 1 through 5 demonstrate various features of the Altera® MAX® II and MAX low-power CPLD families using Quartus® II or MAX+PLUS® II software. For more information about the different design entry methods, refer to the help files in Quartus II or MAX+PLUS II software.
These design examples are intended only for Altera devices. The examples are provided on an "as-is" basis and come with no warranties.
Each design example in Tables 1 through 3 includes the following:
Source code in Verilog
Testbench in Verilog
Quartus II Web Edition software version version 6.0 project files and program files for the MDN B2 or MDN B3 demonstration board (the logic element (LE) and I/O resources shown in Tables 1 through 3 are derived from design compilations using Quartus II software version 7.2)
ModelSim® 6.1d Web Edition software project file with testbench, wave image files
Simulation file not included for large simulations
These design examples may only be used within Altera Corporation devices and remain the property of Altera. They are being provided on an “as-is” basis and as an accommodation; therefore, all warranties, representations, or guarantees of any kind (whether express, implied, or statutory) including, without limitation, warranties of merchantability, non-infringement, or fitness for a particular purpose, are specifically disclaimed. Altera expressly does not recommend, suggest, or require that these examples be used in combination with any other product not provided by Altera.